Create a Scene in SmartCast Touchscreen

Introduction

The SmartCast Touchscreen provides the Cadiant Dynamic Skylight system a scene controller capability . The SmartCast Touchscreen ships with a collection of default scenes as guidelines for user creation. The Settings screens provide tools for creating user-defined scenes.

Default Scenes

The SmartCast Touchscreen ships with a collection of default scenes as guidelines for user creation. Here is a listing of the parameters for each default scene.

Scene Parameters

• Brightness: Sun Panel Dimming Level (%)
• Color: Sun Panel CCT Level (K)
• Sky: Sky Panel Toggle (ON / OFF)
• Sky Color: Sky Panel Intensity Level (%)
• Sun Position: Sun Panel Intensity Distribution (% and Direction East / West)

Steps to Create a Scene

To create a new scene for the Cadiant system using the SmartCast Touchscreen:

1    Press the Settings button to open the Settings menu.
2    Enter the 6-digit PIN to access the Settings menu.
3    Open the Scenes Control page from the Settings menu.
4    Press the New Scene button.
5    Enter a name for the scene.
6    Press the Add Zone button to select the zone that will use the scene.
7    Select the Zone for the scene and press Add Zone to configure the zone.
8    Use the controls to configure the zone and save the configuration.
9    Press the Create Scene button to complete the scene creation.
10    Exit out of the Scene Controls page and the Settings page.
11     Verify that the Scene is correct.